Time relay 12-240V AC/DC type: PCM-02/U EXT10000077

Single-function relay PCM-02/U. It is used to implement the function of delayed shutdown (aversive) in automation and control systems. The relay is triggered by the supply voltage. It is characterized by a very wide range of time settings from 0.1 second to 10 days. Additional ON / OFF functions enable permanent switching on or off of the receiver. The system has indicators for: supply voltage, relay status and time measurement - realized by means of LED diodes.

Technical data:

• dimensions: 90 x 17.5 x 66 mm
• rated voltage: 12 ÷ 240 V AC / DC
• Maximum contact voltage: 250 V
• Use category: AC1
• Maximum relay power: 4000 VA
• number of change-over contacts: 1
• relay current: 16 A
• rated current consumption: 15 mA
• IP degree of protection: 20
• enclosure mounting: TH35 rail
• power terminals: A1, A2
• supply voltage tolerance: -5%, +10%
• voltage indicator power supply: LED, green
• nominal frequency: 50 / 60 Hz
• number of operating modes: 1 (delayed off)
• time setting range t: 0.1 seconds ÷ 10 days
• time measurement accuracy: 0.2 %
• time setting: 2x potentiometer (rotary + step)
• relay status and time measurement indicator: red LED
• Number of connection terminals: 5
• Cable section: 0.2 ÷ 2.5mm²
• operating temperature: -20 ÷ +60 °C
• work position: any
• protection class: II
• overvoltage category: II
• pollution degree: 2< /li>
• surge voltage: 2 kV

Advantages:

• operating mode: delayed switching off (triggered supply voltage)
• indication of supply voltage - green LED
• indication of relay status and timing - red LED
• high accuracy of time measurement< /li>
• wide range of time settings
• functions of permanent on or off
• relay output - one changeover contact with a maximum load capacity of 16 A
• housing single-module