The mH-V8 module is an eight-channel executive module that controls the operation of solenoid valves connected to the module outputs and is adapted to work with mH-S8 temperature sensor modules. The module is mounted in the switchgear and occupies a field of 5 modules, and the module's supply voltage is 230 VAC. The module is suitable for controlling solenoid valves in heating circuits (usually installed on the collector) with a coil voltage of 230 VAC and works on the on-off principle, independently of the main touch panel (it is an autonomous pair with the mH-S8 module located on the same level ). If it is necessary to connect more temperature sensors, several mH-V8 modules can be used, but remember that they must be modules of subsequent levels (mH-V8 - level 1, mH-V8-level 2, …).

< tr class="ng-scope odd">< td class="attr tar">

Manual controls

< td class="attr tar">

KNX bus system

Parameter	Value
Central Disable	No
Rated frequency	50; Hz
Rain sensor	No
Function	Extension Module
Panic function	No
Depth	65.0 mm
Number of channels	4.0
Stair and warning lights	No
Rated current	2.0 A
< div class="attr_content ng-binding">Astronomical Program	No
Weekly program	No
Block switch	No
Contact type	NO contact
Mounting method	REG/DRA
Protection level (IP)	IP20
Presence simulation	No
Width	87.5 mm
Width in number of modules	5.0
Height	90.0 mm
Rated voltage range	230; V
Dimming per channel	100.0 W
Valve protection function	yes
Other bus systems	Other
Number of outputs	8.0
Maximum switching current (resistive load)	0.5A
Maximum output current	4.0 A
Connection voltage	85.0V
yes < /span>
Funkbus (radio) bus system	no
no
KNX bus system with radio transmission< /div>	no
LON bus system	no
Powernet bus system	no
Setting value fixed	yes < /span>
Setting value variable < /td>	yes
Includes bus connector	yes