Input/output module mH-IO32-1 MH-IO32-1

The mH-IO32 input/output module is the basic module of the F&Home system equipped with 32 binary inputs and 32 binary outputs (operating on the on-off principle). The module is mounted in the switchgear (occupies a field of 6 modules) and is supplied with 24V DC voltage. Buttons located on the building, connected with UTP cables, are brought to the inputs of the module. The module manages the lighting and other receivers on an on-off basis via relay executive modules of the mH-R8x8, mH-R8/2 or mH-R2x16 type. The control takes place fully on the low voltage 24V line, which ensures safety and the possibility of any arrangement of control buttons in the building. The mH-IO32 module communicates with touch panels via the CAN bus. Any output of the module can be triggered from the touch panels by selecting a specific device or scene (group of devices). From the touch panel level, it is possible to program timed automatic switching on/off of devices or groups of devices controlled from the input/output module. In addition, four inputs of the module are dedicated to controlling the operation of the mH-L4 type lighting dimmer module via the CAN network. If more inputs/outputs are needed, several IO modules can be used, but remember that they must be modules of subsequent levels (mH-IO32 – level 1, mH-IO32-level 2…).