Description

Bistable relay PBM-02/24V. It is used to control lighting or any other device using unipolar pushbuttons connected in parallel. Successive pressing of any of the buttons causes switching on or off the devices connected to the output terminals. The Set and Reset control inputs allow for central control of a group of relays. The use of internal memory in the bistable relay allows you to remember its current state in the event of a power failure.

Technical data:

< ul>

Dimensions: 90 x 17.5 x 66 mm

Rated supply voltage: 24 V AC / DC

Maximum contact voltage: 250 V

Use category: AC1

Maximum relay power: 4000 VA

Number of NO contacts: 1

Number of NC contacts: 0

relay current: 16 A

rated current consumption: 24 mA

IP rating: 20

housing mounting: TH35 rail

power terminals: +/ ~, -/

power supply voltage tolerance: -15 ÷ +10%

Rated frequency: 50 / 60 Hz

Power supply voltage indicator: LED, green

Trigger terminals: IN, IN, IN

trigger control current: 930 μA

central control terminals: Set, Reset

relay indicator: red LED

control relay operation: TEST button

number of connection terminals: 10

section of connection wires: 0.2 ÷ 2.5mm²

operating temperature: -20 ÷ +45 °C

work position: any

protection class: II

overvoltage category: II

pollution degree: 2< /li>

surge voltage: 1 kV

Advantages:

bi-stable (bi-state) lighting control
supply voltage indicator - green LED
relay status indicator - red LED
central control functions
relay status memory< /li>
IN input control - for DC: +/-, for AC: ~/~
SET, RESET input control for DC: -, for AC ~
operation with many single-pole illuminated push-buttons
TEST function
two-wire control installation
relay output - one NO contact with a maximum load capacity of 16 A