Standing frame cabinet, 45U, dim. 800x1000x2090 EM/SH05D-8045

Description and technical characteristics of the product:

The construction of the cabinet is made of steel sheet.
The frame is screwed from steel profiles, adapted to be set on nó
horizontal or pedestal-mounted. Ventilation panel in the roof, 2 or 4
fans. The frame has four cable entry openings (250x40mm).
4 leveling feet.
Front door with glued-in tempered glass and a 1-point lock equipped
with a rotary lever mounted on hinges enabling the door to be opened
180 degrees.
Rear door and two side walls made of steel sheet, removable, fastened
with single-point locks.
3 horizontal traverses for fixing vertical profiles.< br />4 vertical mounting profiles, minimum distance from the front door 35mm
(standard 95mm). Possibility of adjusting the position every 20 mm.
Earth cable supplied.
Fixed panels fixed in 4 points (3 pcs.), 20 mounting screws and a set of 2 fans (600x600 cabinets ) or 4 fans (other sizes of the cabinet) and
thermostat as standard equipment.
Cabinets are intended for indoor use.
The possibility of connecting cabinets in rows (with the use of cabinet connector EM/JI03 /N).
The possibility of using wheels (when using wheels
the maximum static load capacity must not exceed 150 kg).
The possibility of placing on pedestals.

Technical parameters:
Standard RAL color: wardrobe 7044, door 7010
The door can be mounted on the right and left side, equipped with a 1-point lock
Two mounting planes 19” (with the possibility of installing more)
Protection level: IP 20 (does not apply to cabinets with mounted brush ducts).

Mounting kit:

• 4 x cable entry plate
• 2 x key for side and rear walls
• 2 x key for front door