MULTIWALL Three-pole flush-mounted box M3x60F 3xfi60mm orange 33167008

Fushmount

• Equipped with 4 half-compartment pull-outs with weakening in the lower part for cable routing and 6 screws.
• There are many knockouts in the side walls for connecting conduits or ø 20mm pipes.

Accessories matching the box:

• Lid closing box PM1 (intended for closing the extreme - outer panels of the box - when using it as an equipment box with enlarged installation space). The lid is placed at the level of the top flange of the box – therefore it does not protrude above the level of the mounted box.
• PM2 closing cover (designed to close the central part – of the box, complete with two PM1 covers, the entire space of the box can be closed).
• PS1 and PS2 signaling covers (two end covers PS1 and one central cover PS2 allow to close the space of the box for plastering works).
• PDM60Z, PDM60W spacer rings are used to deepen multi-pole boxes from the Multiwall and Multibox2 series. They are fastened with screws to the box body. The rings can be shortened by cutting off the ribs spaced every 6 mm. Similarly to cans, rings can be closed with PM1 and PM2 covers. PS1 and PS2 signal covers can also be used for plastering works.
• W16, W25, W40 screws