Some of the data collected by this provider is for the purposes of personalization and measuring advertising effectiveness.
We do not use cookies of this type.
Some of the data collected by this provider is for the purposes of personalization and measuring advertising effectiveness.
Some of the data collected by this provider is for the purposes of personalization and measuring advertising effectiveness.
230685
0
Radio switch The RWS-311D/Z network controller is designed for remote (by radio) control of all kinds of electrical devices such as: motors, lamps, gate drives, pumps, garden lighting, etc. The device operates on the basis of a protocol compatible with the exta free wireless system and works with the transmitters of this system. Radio waves with a frequency of 868.32 MHz were used for transmission between the transmitter and the receiver. The receiver has a hermetic housing (IP56), so it can be mounted outdoors and can work in difficult weather conditions. The RWS-311D/Z switch is powered directly from the 230 V AC mains. It has two relay outputs with NO contacts. The load capacity of the relay contact is 16 A / 250 V AC 4000 VA AC1. Using the RWS-311D/Z, you can independently control up to two electrical circuits. Cooperation with the exta free wireless system gives a lot of control possibilities. For example, after using the EFC-02 Mini or EFC-01 controllers, you can control the circuit breaker from mobile devices (tablets, smartphones) and automate certain control processes. Operating modes for RWS-311D/Z are set independently for channel 1 and for channel 2. They are set on the switch: operating mode. In the case of the RWS-311D/Z set, the 2-button P-257/2 remote control is included with the switch. Other transmitters can also be assigned to the receiver (up to 113).
Receiver specifications:
Transmitter technical data:
Advantages:
About company
Online shopping
Contact
We belong to: