The binary input module collects signals from the object, e.g. from sensors. The module is made in the 4-wire technique, thanks to which sensors with a PE contact can be connected directly to it. The object and system bus are galvanically separated from each other.
Technical data
Filter
10
Number of inputs
2
Installation
On the TH-35 rail
Input current [mA]
6.5
Series
750
Width [mm]
12
Height [mm]
64
Depth [mm]
100
Maximum field bus load [A]
DC 10
Signal voltage [V]
0-40
Gauge [AWG]
28
Level of security
IP20
Internal current consumption [mA]
2
Other technical data
Supply voltage AC 50 Hz
230 ... 230 V
Voltage type (supply voltage)
AC
Number of digital outputs
0
Digital outputs configurable
No
Permitted voltage at input
0 ... 253 V
Type of digital output
Other
Number of HW-interfaces industrial Ethernet
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces parallel
0
Number of HW-interfaces USB
0
With optical interface
No
Supporting protocol for PROFIBUS
No
Supporting protocol for INTERBUS
No
Supporting protocol for KNX
No
Supporting protocol for Data-Highway
No
Supporting protocol for SUCONET
No
Supporting protocol for PROFINET IO
No
Supporting protocol for SERCOS
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for other bus systems
Yes
Radio standard WLAN 802.11
No
Radio standard GSM
No
IO link master
No
Degree of protection (IP)
IP20
Time delay at signal change
10 ... 10 ms
Rail mounting possible
Yes
Front built-in possible
No
Suitable for safety functions
No
Appendant operation agent (Ex ib)
No
Explosion safety category for dust
ATEX dust-ex-protection, Cat. 3D
Height
64 mm
Supply voltage AC 60 Hz
230 ... 230 V
Number of digital inputs
2
Digital inputs configurable
No
Input current at signal 1
6.5 mA
Type of voltage (input voltage)
AC
Short-circuit protection, outputs available
No
Number of interfaces PROFINET
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces wireless
0
Number of HW-interfaces other
0
Supporting protocol for TCP/IP
No
Supporting protocol for CAN
No
Supporting protocol for ASI
No
Supporting protocol for Modbus
No
Supporting protocol for DeviceNet
No
Supporting protocol for LON
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for SafetyBUS p
No
Radio standard Bluetooth
No
Radio standard GPRS
No
Radio standard UMTS
No
System accessory
Yes
Type of electric connection
Spring clamp connection
Fieldbus connection over separate bus coupler possible