Roller shutter controller 24V 1W 2A STR-422-24V

Operation
Power supply to the controller is signaled by the green LED U. The roller shutter motor is switched on by momentarily applying voltage (L or N) to one of the control inputs. The motor is switched on for a time pre-programmed by the user, allowing the blind to be fully raised or lowered. Motor operation and direction  the movement of the roller shutter is signaled by the lighting of the appropriate red LED  or . It is possible to stop the activated roller shutter at the level selected by the user (incomplete opening or closing of the roller shutter).  
 

Controller inputs
Control local - button connected to terminal 7 controlling  one blind.
 - upóhand  (opening) / downódown  (closing)
Pressing the local button causes the roller shutter to be switched on for movement in the opposite direction to the last performed one (after connecting the controller to the power supply, the first movement causes the roller shutter to be closed). If the roller shutter is already in motion, pressing the local control button will stop the roller shutter. Pressing the local button again causes the blind to move in the opposite direction.
Central control -  common for many controllers (at least two) group of buttons connected to terminals 4 and 6, controlling all roller shutters in the central control system. Pressing the central control button causes the roller shutters to move in a given direction. If one of the blinds is already moving in the same direction, then  it will continue. If it moves in the opposite direction, the roller shutter will first be stopped and then activated in the direction resulting from the command given to the central input.

ATTENTION!
Control the central one enables only switching on the roller shutters for movement in the selected direction. The roller shutter will stop only after the programmed time has elapsed or after pressing any local control button.
   

Technical data