Threaded terminal block ZSG ( ZUG ) 6mm², red 43401RD

Threaded rail terminal with a gray housing. It is used to connect electrically and mechanically wires in electrical devices and installations. It can connect both wire and stranded wires with a specific cross-section. The connector has an explosion-proof version "Eex e". It is used for mounting on a 35 mm DIN rail. The terminal blocks have a body made of thermoplastic material, which is often used in electrical engineering. Its properties include resistance, durability and strength. The clamps used in the threaded connectors minimize the possibility of loosening the wires. The connector belongs to the wide product range of EM Group, which distributes electrical installation materials. The articles it supplies to customers ensure the quality and reliability of the work performed.

Product series: EURO
Explosion-proof version 'EEx e': Yes
Closing plate required: Yes
Cross section of the connected multicore cable [mm²] from: 0.5
Cross-section of the connected multi-core cable [mm²] to: 6
Cross-section of the connected stranded wire without ferrule [mm²] from: 0.5
Cross-section of the connected stranded wire without ferrule [mm²] to: 10
Connection position: Side
Inner floors bridged: No
Number of terminals per floor: 2
Number of levels: 1
Cross-section of connected solid conductor [mm²] from: 0.5
Cross section of connected solid conductor [mm²] to: 10
Cross section of connected stranded wire with ferrule [mm²] up to: 6
Cross section of the connected stranded wire with ferrule [mm²] from: 0.5
Type of electrical connection 1: Screw connection