Tray for routing cable routes in halls or places with a limited number of supporting structures. The high strength of the troughs allows the use of supports even every 10 m.
Technical data
Length [mm]
6000
Material
Hot-dip galvanized steel
Height [mm]
160
PKWIU
25.11.23.0
Thickness [mm]
1.5
Width [mm]
400
Usable cross-section [mm²]
54,700
Other technical data
Supply voltage AC 50 Hz
85 ... 264 V
Supply voltage DC
0 ... 0 V
Switching current
8 A
Number of analogue outputs
0
Number of digital outputs
6
Number of HW-interfaces industrial Ethernet
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces USB
0
Number of HW-interfaces wireless
0
With optical interface
No
Supporting protocol for PROFIBUS
No
Supporting protocol for INTERBUS
No
Supporting protocol for KNX
No
Supporting protocol for Data-Highway
No
Supporting protocol for SUCONET
No
Supporting protocol for PROFINET IO
No
Supporting protocol for SERCOS
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for other bus systems
No
Radio standard WLAN 802.11
No
Radio standard GSM
No
IO link master
No
With display
No
Basic device
Yes
Expansion device
No
Rail mounting possible
Yes
Front built-in possible
No
Suitable for safety functions
No
SIL according to IEC 61508
None
Appendant operation agent (Ex ia)
No
Explosion safety category for gas
None
Width
107.5 mm
Depth
58 mm
Supply voltage AC 60 Hz
85 ... 264 V
Voltage type (supply voltage)
AC
Number of analogue inputs
0
Number of digital inputs
12
With relay output
Yes
Number of interfaces PROFINET
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces parallel
0
Number of HW-interfaces other
1
Supporting protocol for TCP/IP
No
Supporting protocol for CAN
No
Supporting protocol for ASI
No
Supporting protocol for Modbus
No
Supporting protocol for DeviceNet
No
Supporting protocol for LON
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for AS-Interface Safety at Work