Internal vertical arch width 400mm height 160mm 284416

Índice local:
TAK2T6BAKS
Número de catálogo:
284416
Código EAN:
5900993214062
Fabricante: BAKS
Thickness [mm]: 2
Material: Hot-dip galvanized steel
Width [mm]: 400
Precio:
1 043,54 zł
gross / uds.
(IVA incluido 23%)
hasta 4 semanas
Por encargo
Cantidad uds.
(múltiple:
1
)
Añadir a solicitud de presupuesto
Añadir al portapapeles
Imprimir

Descripción del producto

Internal 90 degree bend to change the direction of cable routing.

Datos técnicos

  • Thickness [mm]
    2
  • Width [mm]
    400
  • PKWIU
    25.11.23.0
  • Material
    Hot-dip galvanized steel
  • Height [mm]
    160

Otros datos técnicos

  • Rated permanent current Iu
    20 A
  • Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
    50 kA
  • Adjustment range short-term delayed short-circuit release
    0 ... 0 A
  • Integrated earth fault protection
    No
  • Device construction
    Built-in device fixed built-in technique
  • DIN rail (top hat rail) mounting optional
    Yes
  • Number of auxiliary contacts as normally open contact
    0
  • With switched-off indicator
    No
  • Position of connection for main current circuit
    Front side
  • Complete device with protection unit
    Yes
  • Motor drive optional
    No
  • Rated voltage
    690 ... 690 V
  • Overload release current setting
    15 ... 20 A
  • Adjustment range undelayed short-circuit release
    350 ... 350 A
  • Type of electrical connection of main circuit
    Frame clamp
  • Suitable for DIN rail (top hat rail) mounting
    No
  • Number of auxiliary contacts as normally closed contact
    0
  • Number of auxiliary contacts as change-over contact
    0
  • Number of poles
    4
  • Type of control element
    Rocker lever
  • Motor drive integrated
    No
  • Degree of protection (IP)
    IP20

Detalles del fabricante

  • Fabricante
    BAKS Kazimierz Sielski
  • Dirección
    05-480 Karczew Jagodne 5 Polska
Informar de un error