Surface-mounted twilight switch without probe 230V AC type: WZN-01 EXT10000147

Twilight switch WZN-01 is used to control lighting devices or other energy receivers depending on the lighting intensity - it switches the lighting on at dusk and off at dawn. The activation speed can be smoothly set by the user. The device is resistant to short-term changes in light intensity, which guarantees operational reliability. The SOH series outdoor illuminance probe with a maximum cable length of 50 m allows it to be placed in convenient places.

Specifications:

• Dimensions: 69 x 56 x 27 mm
• Rated supply voltage: 230 V AC
• Maximum contact voltage: 250 V
• Use category: AC1
• Maximum relay power: 4000 VA
• Number of NO contacts: 1
• Number of NC contacts: 0
• relay current: 16 A
• rated current consumption: 24 mA
• IP rating: 20
• housing mounting: wall plug  6 x (3.5 x 35)
• power terminals: L, N
• power supply voltage tolerance: -15 ÷ +10 %
• Rated frequency: 50 / 60 Hz
• Power supply voltage indicator: Green LED
• Lighting probe terminals: F, F
< li>maximum length of the probe cable: 50 m (MTY 2 x 0.5 mm²)
• receiver power supply terminals: N, P
• setting range of the activation threshold: 0 ÷ 200 lx (rotary potentiometer)
• relay indicator: red LED
• number of connection terminals: 6
• cross section of connecting wires: 0.2 ÷ ; 2.5mm²
• operating temperature: -20 °C ÷ +45 °C
• work position: any
• protection class: II
• overvoltage category: II
• pollution degree: 2< /li>
• surge voltage: 1 kV

Advantages:

• control of receivers depending on light intensity
• supply voltage indicator light
• relay status indicator light
• smooth adjustment of the activation threshold
• wide range of activation threshold settings
• resistance to short-term changes in lighting intensity
• switching threshold hysteresis