Carbon monoxide and gas sensor GARDI mains-battery 90dB IP20 white CTG-02 GAR10000071

The CTG-02 sensor is used for continuous monitoring of dangerous concentrations of both carbon monoxide and natural gas and propane butane in the air. When a dangerous concentration is detected, the device activates an audible and visual alarm and displays the concentration level and type of detected gas on the LCD display. It is mains powered (power supply included) but also has an emergency battery power supply so it will work even after a power failure in the installation. It is equipped with advanced semiconductor and electrochemical sensors and a self-diagnostic system that signals sensor damage.

It complies with the latest standard for carbon monoxide sensors: PN-EN50291-1:2018.

Each copy of carbon monoxide sensors manufactured by ZAMEL is tested in a specialized test chamber and receives a certificate of correct operation (detection of carbon monoxide concentration at a level of 300 ppm in less than 3 minutes).

Functional features of the product:

• 2 in 1 sensor that detects dangerous concentrations of carbon monoxide and gas (natural and propane butane)
• mains power supply via the included power supply
• sensor damage and end-of-life signaling (self-diagnostic system)
• tested in Poland, certificate of correct detection of carbon monoxide concentration at the level of 300 ppm in less than 3 minutes with the serial number of the given item entered
• emergency battery power supply (CR17450 battery) in the event of a power outage
• sensor life of 7 years
• LCD display showing the current level of carbon monoxide and gas concentration and information messages
• Carbon monoxide detection levels (in accordance with the PN-EN50291-1:2018 standard):
  • 30 ppm (over 120 minutes)
  • 100 ppm (over 10 to 40 minutes)
  • 300 ppm (up to 3 minutes)
• optical and audible alarm signal (90 dB)