OA1 Manual Emergency Button OA1-W01-A\01-230

The OA1 manual button is intended for use in places where emergency manual control is required. An example of application can be evacuation passages, which in an emergency must be opened in an emergency by breaking the glass. OA1 can also be used in areas where in case of danger it is required to disconnect the power supply by permanently damaging a fragile element. The OA1 is offered in two versions, type A and type B. Type A in an emergency situation only requires breaking the glass, which will release the button. For type B, after breaking the glass, press the button with automatic return. OA1, due to the mounting method, is available in a surface-mounted and flush-mounted housing. Up to three switches SP22-10 (NO) or SP22-01 (NC) can be installed in each enclosure. The activation and sending of the signal takes place by breaking the glass (type A) or after breaking the glass and pressing the button with automatic return (type B). The alarm status is canceled by replacing the fragile element (glass - order symbol PPOŻ-5701). Labels with the inscription Emergency Door Opening and Emergency Switch are attached loosely to the product.