Pulse stabilizer 5V ZI-11

Description du produit

Operation
You can connect voltage to the input terminals. alternating or constant (pulsating or filtered). Due to the high operating frequency of the inverter, some highly sensitive radio or microprocessor devices may malfunction. It is recommended to install an additional filter (consisting of a current-compensated choke with an inductance of 2×5÷15mH and a capacitor C=0.33÷1µF) between the power supply and the receiver. When the load is increased above Imax, the power supply will stabilize the current, and the voltage out will fall. When the output terminals are shorted, the power supply operates at a frequency of approx. 1.5kHz, which is manifested by a clear squeak.

Switching frequency [kHz]

52
Current limit [A]

110
connection

2.5mm screw terminals
Weight [g]

150
Package height [mm]

150
Package weight [kg]

0.15
PKWIU

27.11.42.0

Installation

On the TH-35 rail
Output current [A]

3
Working temperature [°C]

-10-40
Dimensions

3 modules (52.5mm)
Package width [mm]

60
Output current [A]

3

Autres données techniques

Primary voltage

28 V
Rated power

15 VA
Galvanic separation between input and output

No
Suitable for mounting on PCB

No

Secondary voltage

5 V
Rated secondary current

3 A
Ambient temperature during operating

-10 ... 40 °C
Degree of protection (IP)

IP20

Détails du fabricant

Producteur

F&F Filipowski S.K.
Adresse

95-200 Pabianice Konstantynowska 79/81 Polska
E-mail

biuro@fif.com.pl

Une sorte de paquet	C62
Quantité	1 pcs.
poids (kg)	0,130
Largeur (m)	0,107
Longueur (m)	0,060
Profondeur (m)	0,070

Pulse stabilizer 5V ZI-11 ZI-11

Description du produit

Données techniques

Autres données techniques

Détails du fabricant

Emballage en vrac

Fichiers à télécharger