WME-5 kit (MPI-502, MIC-10, CMP-400) WMPLWME5

A set of electrical installation meters that allows you to perform all measurements of electrical installations:

• short-circuit loop impedance with a resolution of 0.01 Ω (also in installations equipped with RCDs),
• parameters of AC and A type RCDs,
• continuity of protective and equipotential bonding connections,
• insulation resistance with voltage up to 1 kV.

The set includes the following devices: MPI-502, MIC-10 and CMP-400 with accessories.

​MPI-502 multifunctional meter of electrical installation parameters

The device allows you to measure:

• short-circuit loop impedance;
• short-circuit loop impedance in circuits with RCDs;
• all parameters of residual current devices;
• continuity of protective and equipotential bonding (in accordance with the requirements of the PN-EN61557 standard);
• mains voltage and frequency.

Measurement of short-circuit loop impedance can be carried out for a wide range of voltages (100...440 V) in L-N, L-L, L-PE circuits. Measurements are made using a method that guarantees high accuracy of the result (measuring range according to PN-EN61557 in the range of 0.13...2000 Ω). The MPI-502 also enables the measurement of short-circuit loop impedance in the L-PE circuit for networks protected by RCDs, which is carried out with a very low current, but in a way that also ensures very high accuracy. Another function of the MPI-502 is the measurement of AC and A type RCDs; regular, selective and short delay. Measurements can also be performed in the Auto mode (several selected RCD measurements without the need for their subsequent triggering, including the measurement of the short-circuit loop). A unique feature is the ability to measure the tripping time and current with only one tripping of the circuit breaker.

The measurement results (990 results of each type) stored in the memory can be sent wirelessly to the computer using the included adapter - OR radio receiver -1 (USB).
The modern housing with a large, legible display offers comfort of use and protects against possible damage.

The MPI-502 is an ideal choice for people who prefer small and handy devices.< /p>

MIC-10 insulation resistance meter

Insulation resistance measurement:

• up to 10 GΩ in accordance with IEC 61557-2,
• selectable test voltage: 50, 100, 250, 500, 1000 V
• continuous indication of the measured insulation resistance,
• self-discharge capacitance of the measured object after the insulation resistance measurement,
• acoustic determination of five-second time intervals to facilitate the capture of time characteristics,
• indication of the actual test voltage during the measurement,
• protection against measurement live objects,
• three-wire measurement.

Continuity measurement of protective and equipotential bonding in accordance with PN-EN 61557-4 with a current >200 mA.

Low-voltage measurement of circuit continuity and resistance:

• measurement of circuit resistance (<1999) with current <15 mA,
• fast acoustic signaling for a circuit with a resistance lower than 30 Ω.

Possibilities: Capacitance measurement during RISO measurement. Measurement of direct and alternating voltages in the range of 0...600 V. Possibility of power supply with 4 rechargeable or AA alkaline batteries, supply voltage monitored in the meter.

CMP-400 digital clamp meter< /p>

The CMP-400 clamp meter is designed for direct measurement of alternating current up to 400 A. The device can also measure direct and alternating voltages up to 600 V with the use of additional test leads. An additional advantage of the meter is the measurement of resistance and continuity of connections with acoustic signaling. It is also possible to measure the temperature using the probe supplied with the meter.