CHARACTERISTICS Harmonized cables (H), intended for use in moderate climates, with multi-wire copper conductor (K), PVC insulation (V), for rated alternating voltage not exceeding - between the core and the earth” 300V - between the cores of 500V wires. CONSTRUCTION • vein – multi-wire copper wire. • insulation – PVC. • insulation colors – in accordance with the order. PACKAGING Normally, cables are delivered in reels, wound on conical spools and wrapped in stratch foil or in cardboard boxes. BENDING RADIUS Smallest allowable bend radius for 4d wires, with careful bending of the 2d ends, where d is the outside diameter of the wire. TEMPERATURE The cables are designed to operate in temperatures from 5 to 70°C. The highest permissible long-term temperature of the conductor during the operation of the cable must not exceed 70°C. Ambient temperature during storage must not exceed 40°C, in sunlight 60°C. APPLICATION The cables are suitable for permanent connections and cabling of moving (vibrating) elements inside machines, devices and apparatuses, as well as for secured installations in and near lighting fixtures. They can be used in cable ducts, in installation pipes mounted on the surface or embedded in it, only for signaling or control devices. • The cables are not suitable for at elevated temperature, as load-bearing elements, to be laid directly in the ground. • The cables are not tested for active chemical substances. • The use of cables contrary to their intended use or mechanically damaged cables may cause electric shock, fire, disability or death