Radio multifunction transmitter FW-R1P-P

Radio multifunctional relay from the manufacturer F&F. The product catalog number is FW-R1P-P. Multifunctional, 1-channel bistable relay. Intended for installation in Ø60 flush-mounted box. 

• Cooperation with F&Wave radio remote control transmitters.
• Single multifunctional relay. Implemented functions:
  • Bistable – the first pressing of the button turns on the relay, the second pressing turns off.
  • Timer – pressing the button turns on the relay for the programmed time. The time can be set from 1 second to 48 hours. Pressing the button with the relay switched on starts the time measurement from the beginning.
  • Monostable – the relay remains on as long as the button on the remote control is pressed.
  • Enable – pressing the button turns the relay on Off – pressing the button turns off the relay.
• The function of the relay is related to the button of the transmitter. Each button can perform a different function.
• Up to 32 transmitters can be controlled.
• Local controls – possibility of direct control of the relay using any monostable button (e.g. bell button). The local input can be assigned any relay function.
• Group programming of transmitters. If several push-buttons have the same function, they can be set in one programming cycle.
• Separated NO output contact with a load capacity of 8 A (AC-1).
• Small housing size.
• Screw terminals for easy installation in a flush-mounted box.
• Retransmission of signals from the transmitter – the ability to extend the remote control range.
• Low power consumption – low cost of operation.
• Built-in electronic thermal protection preventing damage in case of excessive load on the relay.

Parameters

• Supply voltage: 85÷265 V AC/DC.
• Control signal: L or N.
• Output load capacity (AC-1): 8 A / 250 V.
• Radio frequency: 868MHz.
• Standby/operation power consumption: 0.25W / 0.6W.
• Operating temperature: -25 ÷ 65°C.
• Dimensions: 43mm × 48mm × 20 mm.