141789
0
Microprocessor radio RWS-211J/N power switch designed for remote (by radio) control of all kinds of household electrical devices (e.g. motors, lamps, entrance gates, garden and home lighting, pumps, optical and acoustic signaling). The device uses the KEELOQ rolling code system from Microchip Technology Inc. USA. Each transmission to the receiver is dynamically coded, and each remote control has its own unique code, which ensures the highest level of security for the user. For the transmission between the receiver and the transmitter, a signal with a carrier frequency of 433.92MHz was used. The receiver has an IP56 hermetic housing, therefore it can be used in unfavorable weather conditions. RWS-211J/N is intended for direct power supply from the 230 V AC mains and can operate in continuous operation mode. Low power consumption (3 VA) allows this device to be classified as an energy-saving solution. Self-locking strips were used to connect the wires, which facilitated assembly. At the output of the system, a relay with a contact load of 16 A / 250 V AC 4000 VA / AC1 was used. The single-channel receiver is built of one track, with the setting of the operating mode (monostable / bistable) and with smooth adjustment of the time setting in the monostable mode. The RWS-211J/N set includes a single-channel receiver. In addition, the RWS-211J/N can work with several types of ZAMEL remote controls: P-258/2 (two-button key fob), P-258/4 (four-button key fob), P-259/8 ( eight-button remote control), P-207/2 (two-button remote control).
Receiver technical data: