The modules are used to supply the field bus with the appropriate potential. The maximum current flowing through the power supply module is 10 A. When configuring the system, make sure that this total current is not exceeded. If such a situation occurs, another power supply module should be used.
Technische Daten
Depth [mm]
100
Rated voltage [V]
230
Series
750
Width [mm]
12
Installation
On the TH-35 rail
Gauge [AWG]
28
Level of security
IP20
Height[mm]
64
Weitere technische Daten
Supply voltage AC 50 Hz
0 ... 230 V
Supply voltage DC
0 ... 230 V
Number of HW-interfaces industrial Ethernet
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces parallel
0
Number of HW-interfaces USB
0
With optical interface
No
Supporting protocol for PROFIBUS
No
Supporting protocol for INTERBUS
No
Supporting protocol for KNX
No
Supporting protocol for Data-Highway
No
Supporting protocol for SUCONET
No
Supporting protocol for PROFINET IO
No
Supporting protocol for SERCOS
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for other bus systems
No
Radio standard WLAN 802.11
No
Radio standard GSM
No
System accessory
Yes
Type of electric connection
Spring clamp connection
With power supply module
Yes
Remote module
No
Bus diagnosis possible
No
Wall mounting/direct mounting
No
Rack-assembly possible
No
Appendant operation agent (Ex ia)
No
Explosion safety category for gas
ATEX gas-ex-protection, Cat. 3G
Width
12 mm
Depth
100 mm
Supply voltage AC 60 Hz
0 ... 230 V
Voltage type (supply voltage)
AC/DC
Number of interfaces PROFINET
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces wireless
0
Number of HW-interfaces other
0
Supporting protocol for TCP/IP
No
Supporting protocol for CAN
No
Supporting protocol for ASI
No
Supporting protocol for Modbus
No
Supporting protocol for DeviceNet
No
Supporting protocol for LON
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for SafetyBUS p
No
Radio standard Bluetooth
No
Radio standard GPRS
No
Radio standard UMTS
No
Degree of protection (IP)
IP20
With potential separation
No
Suitable as segment module
Yes
Fieldbus connection over separate bus coupler possible
Yes
Rail mounting possible
Yes
Front built-in possible
No
Suitable for safety functions
No
Appendant operation agent (Ex ib)
No
Explosion safety category for dust
ATEX dust-ex-protection, Cat. 3D
Height
64 mm
Hersteller-Details
Hersteller
WAGO ELWAG SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ