KNX RF QUICKLINK Q.1/Q.3 Button 4-gang white 85648129

4-way button from the KNX RF quicklink series. Main design line: Berker Q.1/Q.3.

Functions:

• additional functions ETS: +6 scenes, 1 button control up/down, operating mode on/off, dimming value, illuminance indicator, push-button switch, status indicator, forced control
• freely configurable functions of the upper/lower and left/right buttons area: as a receiver to control the connected load or as a transmitter for remote control of e.g. blinds
• possibility to configure the functions of the transmitter and/or receiver
• reset function (to factory settings) ;
• possibility to disable saving scenes
• for plasterboard walls

Control elements and indicators:

• possibility configuration of user interfaces for one- or two-level operation
• with a configuration and function button

LED control:

< li> with configuration and function LED
• cap and mechanism compatibility LED indicator

Connection:

• integration with the KNX-TP system via the KNX radio network/surface-mounted TP gateway

Series characteristics:

KNX quicklink is a wireless alternative to the intelligent building technology. An innovative wireless control system using radio communication in the KNX RF standard, without the need for complex cable routing. It has an extremely simple programming method.

• installation in places where cable installation is not possible (e.g. glass walls),
• the possibility of supplementing the traditional installation with additional functionality using a radio control system without high costs,
• the ability to control electrical receivers using remote controls,
• the ability to create light scenes and group and central control functions.