The module allows for direct connection of two thermocouples. Operation of grounded sensors is possible due to internal galvanic separation. The module automatically linearizes the full temperature range. Error compensation in the ambient temperature range of 0 °C - 55 °C is implemented in the module by compensating for cold ends. An interruption of the input circuit is indicated by a red LED. The green LED indicates the readiness of the device and no interference in communication with the network interface. The screen is connected directly to the mounting rail.
Technical data
Processing time [ms]
320
Number of inputs
2
Cold junction compensation
For each sensor
Gauge [AWG]
28
Width [mm]
12
Height [mm]
64
Depth [mm]
100
Color
Gray
Installation
On the TH-35 rail
Series
753
Internal current consumption [mA]
65
Accurate color
light gray
Other technical data
Supply voltage DC
24 ... 24 V
Input, current
No
Input, resistor
No
Input, thermocouple
Yes
Resolution of the analogue inputs
12 b
Output, voltage
No
Number of analogue inputs
2
Analogue inputs configurable
No
Number of HW-interfaces industrial Ethernet
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces parallel
0
Number of HW-interfaces USB
0
Supporting protocol for TCP/IP
No
Supporting protocol for CAN
No
Supporting protocol for ASI
No
Supporting protocol for Modbus
No
Supporting protocol for DeviceNet
No
Supporting protocol for LON
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for SafetyBUS p
No
Radio standard Bluetooth
No
Radio standard GPRS
No
Radio standard UMTS
No
System accessory
Yes
Type of electric connection
Spring clamp connection
Rail mounting possible
Yes
Front built-in possible
No
Suitable for safety functions
No
Appendant operation agent (Ex ib)
No
Explosion safety category for dust
ATEX dust-ex-protection, Cat. 3D
Height
64 mm
Voltage type (supply voltage)
DC
Input, voltage
No
Input, resistance thermometer
No
Input signal, configurable
No
Output, current
No
Output signal configurable
No
Number of analogue outputs
0
Analogue outputs configurable
No
Number of interfaces PROFINET
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces wireless
0
Number of HW-interfaces other
0
Supporting protocol for PROFIBUS
No
Supporting protocol for INTERBUS
No
Supporting protocol for KNX
No
Supporting protocol for Data-Highway
No
Supporting protocol for SUCONET
No
Supporting protocol for PROFINET IO
No
Supporting protocol for SERCOS
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for other bus systems
No
Radio standard WLAN 802.11
No
Radio standard GSM
No
IO link master
No
Degree of protection (IP)
IP20
Fieldbus connection over separate bus coupler possible
Yes
Wall mounting/direct mounting
No
Rack-assembly possible
No
Appendant operation agent (Ex ia)
No
Explosion safety category for gas
ATEX gas-ex-protection, Cat. 3G
Width
12 mm
Depth
100 mm
Manufacturer details
Manufacturer
WAGO ELWAG SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ