PHOBOS BT Electromechanical operator for swing gates up to 400kg 2.5m 24V 40W IPX4 P935096 00002

Electromechanical actuator, without direction change, for up-and-over doors weighing up to 400 kg and up to 2.5 m long

Features:

Technologies:

• Precise, direct and reliable BFT technology powered by 24V for optimal performance with timely adjustable slowdown during closing and opening. Its fundamental aspect is safety, guaranteeing instant stopping and changing the direction of travel in the event of encountering obstacles. The efficiency of technology is a guarantee of product reliability
• Rolling code - To ensure secure data transmission. BFT transmitters use the Rolling Code coding system. managing the control in a completely safe way and preventing any outside interference. Pressing the transmitter button sends a different code each time to the control unit, which can only be identified by the transmitter and accepted only once. The generated algorithm makes it impossible to reproduce the code
• ER ready - New coding system for direct remote cloning Based on microprocessor technology, the system enables cloning of any MITTO remote control and its replacement into a PITTO REPLAY remote control. The first radio remote control "will pass" the co-pilot with the correct code to be automatically stored in the receiver when used for the first time. And thanks to the use of the Rolling Code secure data transmission system, maximum safety is ensured during all these procedures
• EE link - For fast and safe programming. EELINK is a system developed by BFT; thanks to the connection with hand-held programmers (Unipro, Uniradio and Proxima), it allows you to transfer data from automatic machines to personal computers and vice versa. In this way, the EEdbase or U-base, the databases stored in the mounted installations, are constantly updated. Thanks to this software, it is possible to assign the necessary address data to each installation, such as: the dignity and contact information of the owner, the data of the maintenance technician and the owner of each remote control, as well as many other information. With EElink, you just need to press a few buttons to easily manage your customer park or preventive maintenance. It also makes things that used to be complicated much easier: for example, reconfiguring a control module or radio receiver when it is replaced, or configuring a control panel, whether it is a standard or customized configuration< /li>
• D-Track  - Necessary stimulus for safe operation. This intelligent torque management system is based on BFT microprocessor technology. By downloading data from various indicators, it updates the level of thrust necessary to perform the maneuver. D-Track also makes it easier for the installer to implement the certificates required by law. Traditional control units do not read the exact position of the gate and consequently assume a constant level of pushing force, not guaranteeing a stable sensitivity during opening and closing movement. BFT devices register even the slightest fluctuations in the force of the gate or door caused, for example, by temperature differences or wear; thus provide the engine with regular information about the optimal torque. A traditional control panel would not be able to detect fluctuations in the required push force and would start signaling the presence of non-existent obstacles. The BFT system therefore guarantees the maximum degree of safety of the installation and its reliable operation, regardless of climatic conditions, temperature or degree of mechanical wear